Cyclo Drive Reducer

Cycloidal pinwheel reducer can be a up-dated of latest type transmissing machine made with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching mechanism, which are widely used in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical job machinery etc, cranes, conveyors and Industry. various fields.
Features:

1. Equipment is made of high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is used for all with high accuracy, good contact performance and gears
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service existence and high bearing ability;
5. easy to check, assemble and disassemble.

Operation specifications and precautions
1.High modularization design: many equip with various engine or other power source conveniently.Same machine type may equip with different power motor. It really is easy to realize the combination and
junction between every machine type.
2.Transmission ratio: good division, wide scope. The combined machine type may form very large transmission ratio, i.e. result very low rotary speed.
3.Form of set up: the positioning to be installed isn’t limited.
4.High strength, compact: the box body is made of substantial strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and fine grinding process, which means bearing ability of unitvolume is excessive.
5.Long life: Under the condition of right type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life span of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, bearing and essential oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is normally low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High acceleration ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-straight down ratio and the efficiency is usually more than 90%. If make use of multi-speed travel the speed-down ratio is usually bigger.
2. Compact
Being adapted epicyclic transmission basic principle, the input and productivity shaft are in same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can realize high reduction ratio gadget.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged as well, and there are two gears engaged with 180 degree symmetry. Subsequently, the affect of tooth pitch mistake and cumulative tooth pitch mistake on the rotation precision is relatively average, which makes the positioning precision and rotation accuracy reach an extremely high level.
4. Less parts, easy installation
The three basic components achieve a higher deceleration ratio, plus they are all on a single axis, therefore the kit is easy to install and simple to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the volume is 1/3, the pounds is 1/2, but can obtain the same torque ability and reduction ratio, attaining small lightweight.
6 High torque capacity
Flexible wheel material USES unique steel with huge fatigue strength.Different from ordinary transmission device, the amount of teeth meshing accounts for close to 30% of the total amount of teeth. Furthermore, it is in call with the surface, in order that the pressure borne by each equipment is reduced and substantial torque potential can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the power loss due to friction. Therefore, high lowering ratio may be accomplished while maintaining high performance, and miniaturization of driving motor can be realized.
8. Low noise
The apparatus meshing cycle quickness is low, the transmission movement force balance, therefore the operation is quiet, and the vibration is very small.
◆Large speed ratio and large efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will get larger.
◆Because planetary transmission basic principle is adopted, the input shaft and end result shaft are on the same axis line, so that the machine model can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts will make the vibration and voice limited to a minimum.
◆Reliable use and long service life because the primary parts are made from huge carbon chromium steel, large strength is certainly obtained by quenching (HRC58-62), and rolling friction is employed in some transmission contacts, so the service life is long.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has various advantages, versatile, and will be both negative and positive operation.

•Big ratio, and excessive efficiency Smooth operation,

• low noise The utilization of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically zero wear, durable.

• Compact structure,

• tiny size Because the utilization of a planetary transmitting, the type shaft and the output shaft on the same axis, which makes the model to get the smallest possible size.

• Reasonable design, easy repair, and breakdown easily install,

• the least number of parts in addition to straightforward lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion carrier, increase the output strength and precision.

(2).Hoop clamp coupling have five connection techniques ideal for different application environments.

(3).Size in this article PL/PF120(incorporating)precision and high power integral inner gear housing, processed in a single station,which eradicate the cumulative mistake and assembling error of split type.Get rid of casting process;adopt sizzling of forging process, that will reduce the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which simpler to make gear surface area smooth and high accuracy,reduce the temperature rising caused by gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, that have a complete norm, wide speed for selection, and many mounting positions. Its overall performance and mounting dime nsions conform the same varieties of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, radiate heat efficiently, compact structure, beautiful shape and low noise.
Good sealing and adaptability.Its combination with T gear reducer and MB/MBN variator may meet all types of speed requirement.

Tags:

As one of leading power take off shaft manufacturers, suppliers and exporters of mechanical products, We offer power take off shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of power take off shaft

Recent Posts