China Good quality Quick lifting manual bevel gear screw jack from hand operating with wheel crank for 30mm CZPT screw with high quality

FeaturesQuick lifting manual bevel gear screw jack from hand operating with wheel crank for 30mm CZPT screw Features:1. Load capacity 100KG2. Lifting screw diameter 30mm 3. Lifting screw pitch 12mm 4. Bevel gear ratio 1:1 5. Self lock CZPT screw, stroke 300 mm6. With 200 mm diameter cast iron handwheel7. Upright installation8. Rotating screw design9. Standard with 1-start lifting screw10. Lifting Screw Ends: no, full threads11. Housing(Gearbox): Ductile iron12. Lifting Screw: Carbon steel #4513. Input Shaft: Carbon steel #4514. Lifting Nut: High strength bronze15. Accessories: Handwheel, Bronze traveling nut.

A manual screw jack is consist of a hand wheel and a complete worm gear screw jack. The screw jack makes it possible to transform the rotary motion provided by a handwheel, into linear motion that allows push or pull vertical lifting and horizontal positioning. They can be used to lift, pull, move, or align any type of load with perfect synchronism, which is difficult to achieve with other types of actuators.They can be applied either with vertical mountings facingup or down, or with horizontal mountings.
All screw jacks can be moved manually via a handwheel. To do this, 1 input shaft shall be available on the screw jack for the connection of the handwheel. Manual screw jacks are available in load capacity 0.25 ton, 0.5 ton, 1 ton, 2 ton, 2.5 ton, 3 ton, 5 ton, 10 ton, 15 ton and 20 ton, heavy load larger than 20 ton capacity, manual operated screw jack is not recommended. They are ideal solutions for applications where electricity or power generators is inconvenient or dangerous, or in case of power failure, light weight, low duty cycle, low speed, low target cost, short stroke, and intermittent positioning applications. If must be not backdriving, a self locking machine screw jack with handwheel is the best choice. If high speed ball screw jack with handwheel, locking mechanisms need to be considered. If a brake motor is used, the brake shall be un-clamped firstly, so to allow for movement.

Cast Iron Handwheel Diameter 125mm, 160mm, 200mm, 250mm, 300mm and 400mm, larger diameter handwheel is available, please consult CZPT Industry. The recommended screw jack with 0.25 ton, 0.5 ton, 1 ton, 2 ton, 2.5 ton, 5 ton, 10 ton, 15 ton, 20 ton capacities are available in matching cast iron handwheel for hand-operation application.

Aluminum Handwheel with Folding Handle Diameter 125mm, 160mm and 200mm. The recommend screw jack 0.25 ton, 0.5 ton, 1 ton, 2 ton, 2.5 ton, 5 ton capacities are available in matching aluminum handwheel for hand-operation application.

In order to precise position display of the travel length, the worm shaft adds a digital position indicator which measures the rotation and display a corresponding position in a counter window. There are 3 sizes position indicators: 04 series position indicator 4 numbers with 14mm hollow shaft, 09 series position indicator 5 numbers with 20mm hollow shaft, 10 series position indicator 5 numbers with 25mm or 30mm hollow shaft. Note: inapplicable motorized screw jacks.

Miniature Hand Wheel Manual Screw Jack with Clevis End, or Top Plate End
Mini compact CZPT screw jack 2.5 KN capacity, translating screw configuration, upright mount, gear ratios 1/5 (one rpm input travel length 0.8 mm), 14mm diameter lifting screw and 4mm screw leads(pitch) as standard, stroke 65mm, clevis end, or top plate, 2 input shafts, attached handwheels 125mm diameter.
Hand Operated Screw Jack 50 kN
Cubic manual screw jacks load capacity 50 kN, self locking trapezoidal screw diameter 40mm, pitch 7mm, upright mount, translating screw type, stroke 500mm, ratio 7:1 (one rpm input travel length 1mm), threads end attaches rod end bearing, double input shafts, attached protect pipe, and hand wheels diameter 300 mm.

5 ton stainless steel hand crank screw jack for lifting tables. Stainless steel worm gear screw jack 5 ton capacity, translating screw configuration, inverted mount, gear ratios 1/12 (one rpm input travel length 0.59 mm), 40mm diameter lifting screw and 7mm screw leads(pitch) as standard, stroke 1200mm, clevis end fitting, right input shaft and left motor flange, attached handwheel 200mm dia., and electric motor with motor flange.

Manual Operated Worm Gear Jack Screw 5tonnes

Hand Worm Screw Lift Jacks 2.5 tonnes

Manual Screw Jack 5 ton
Crank screw jacks with 5 ton capacity, anti-rotation keyed screw configuration, upright mount, gear ratios 1/7 (one rpm input travel length 1 mm), Shaft DriveChain Drive Encoder limit Switch Industrial Lift Sectional Overhead Door OpenerOperator 40mm diameter lifting screw and 7mm screw leads(pitch) as standard, stroke 350mm, thread end screwed into rod end(set screws fix), right shaft and left shaft, attached handwheels 300mm diameter, rod end bearings, protective pipe and digital counters.

2.5 ton hand operated screw jack lift for industrial vintage cast iron crank dining crank table base. Hand wheel screw jack with 2.5 ton capacity, upright installation, translating screw configuration, gear ratios 1/6 (one rpm input travel length 2 mm), 30mm diameter CZPT screw and 12mm(2P) screw leads(pitch) as standard, stroke 300mm(12″), top plate(flange) end fittings, 2 input shafts, attached handwheel 200mm(8″) or 300mm(12″) diameter, couplings and drive shafts.

2.5ton Stainless Steel Manual Operate Screw Jack with Traveling Nut for Hand Crank Lift Systems. Stainless Steel Machine Screw Jack 2.5 ton capacity, rotating screw configuration, upright mount, gear ratios 1/6 (one rpm input travel length 1 mm), 30mm diameter lifting screw and 6mm screw leads(pitch) as standard, stroke 500mm, plain end fitting, 2 input shafts, attached handwheels 200mm dia., and copper travel nut.

10 ton hand wheel worm gear screw jack for screw jacks platform lift. Hand-operated machine screw jack (or linear actuator) type device 10 tons capacity, upright installation, translating screw configuration, gear ratios 1/8 (one rpm input travel length 1.5 mm), 58mm diameter machine screw and 12mm screw leads(pitch) as standard, stroke 500mm, top plate(flange) end fitting, 2 input shafts, attached handwheels 300mm(12″) diameter.

5ton hand operated lifting screw jacks for mechanical hand crank lift table. Manual machine screw jack 5 tons capacity, translating screw configuration, upright mount, gear ratios 1/6 (one rpm input travel length 1.167 mm), 40mm diameter lifting screw and 7mm screw leads(pitch) as standard, stroke 150mm, clevis end fitting, 2 input shafts, attached handwheels 300mm(12″) diameter, protect tube and bellows boots.

1 Ton Manual Worm Gear Screw Jack for Llifting

Mechanical screw jacks can be operated by manually or by electrical motor. More than 1 screw jacks can be connected together to move simultaneously.Mechanical Lifting and Pulling Screw Jacks These models are used instead of hydraulic jacks where pushing and pulling is neeed between heavy components espacially in industrial building construction works, industrial machinery installations, bridge constructions.Working principle of screw jacksTravelling Screw Type: Main components of screw jacks are; trapezoidal lifting screw, worm screw, worm gear and gear housing. Worm screw is rotated manually or by motor. Worm gear is rotated by worm screw. The lifting screw moves through the rotating worm gear. If free load connected to screw jack, screw will rotate circularly and move up ande down. If it is constantly load, screw will move vertical ways linearly. The linear motion speed of lifting screw depends on thread size and rotation ratio of worm gears.Anti-rotation Keyed Screw Type: Main components of screw jacks are; trapezoidal lifting screw, worm screw, worm gear and gear housing. Worm screw is rotated manually or by motor. Worm gear is rotated by worm screw. The lifting screw moves through the rotating worm gear. In order to prevent/block screw’s rotation, wedge should be opened to screw. By this way, the screw can just move vertically. Screw connection type’s importance will be put away. The linear motion speed of lifting screw depends on thread size and rotation ratio of worm gears.Travelling Nut Type: Main components of screw jacks are; trapezoidal lifting screw, worm screw, lifting nut and gear housing. Worm screw is rotated manually or by motor. With the rotation of the gear, the screw that is inside the screw jack only makes its rotation about its axis. The flange, which is produced from the bronze material on the screw shaft moves linearly upwards or downwards. One of the purposes of using such systems is the lack of ducting or storage for the movement of the screw used in the screw type and screw type cockp. Although screw jack doesn’t lift down from bottom. The linear motion speed of lifting screw depends on thread size and rotation ratio of worm gears.
Manual screw jack (hand wheel screw jacks, hand crank screw jacks, hand operated screw jacks) is driven by a hand wheel or crank or handle. The best advantage is suitable for heavy load, low speed, low service frequency. Our manual screw jacks have different configuration form and assembly type,and the lifting height can highly customized according to users’ demand, low cost and easy operation.
Our standard jacks use Trapezoidal screw and have self-locking function which is very safe for manually operated by hand. We have different models for your selection, our jtw series machine screw jack is the most cost-effective selection for this application. You can also use digital position indicators if you need more precise position display. It can measure the rotations of the input shaft and display the corresponding position in the digital counter window. The display value per input shaft revolution is variable and is achieved through a series of gear reductions configured to accommodate different worm gear screw jack ratios, screw pitch, and travel length.
Packaging & ShippingShipping:1. CZPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.2. Air freight: airport to airport, price terms EXW, CRF etc.3. Air courier: DHL, FEDEX, UPS, TNT door to door shipment, HangZhou Speedway Drive Shaft 5-178X 1350 Slip Yoke price terms DDU, CPT etc.Packing: 100% standard exporting plywood cases.
Note: International Exporting Standard Wooden Material with Free Fumigation.

Our Advantages* One of the biggest orders with 1750 units screw jacks.* Standard products with 2D Drawings(DXF, DWG, PDF) and 3D CAD Model(STEP).* 100% quality assured with double quality inspections. Original Inspection Reports, Operation Manual, and Book Catalogue are put into the packages. * 100% safety transportation with strong standard export plywood cases materials (free fumigation). * International standard materials for all standard products. * Custom design available, OEM service available, Free engineering advice and Customer label available.

Finished Projects1. Theatrical solutions stage and orchestra platform lifts projects. Customers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 2. Hydroelectric power station projects and water conservancy projects. Customers are from Vietnam, Australia, Malaysia, Belgium, United States and United Kingdom. 3. Aircraft maintenance platforms and docking systems projects. Customers are from Singapore. 4. Solar panel tracking system projects. Customers are from Spain, India and Canada. 5. Bolted steel storage tanks and silos lifting solutions. Customers are from South Africa, United States, Mexico and Vietnam. 6. Dish antenna elevation and azimuth positioning projects. Customers are from Singapore, Malaysia and United States. 7. Railway wagon projects. Customers are from South Africa. 8. Beverage can production lines. Customers are from Netherlands, United States, Thailand and Indonesia. 9. Steel factories production lines. Customers are from United States. 10. Continuous PU sandwich panel production lines. Customers are from Thailand and United Kingdom.
Other Products* Manual Screw Jacks.* Electric Screw Jacks.* Worm Gear Screw Jacks Series.* Bevel Gear Screw Jack Series.* Electric Cylinders Series.* Spiral Bevel Gearboxes Series.* Lifting Systems and Accessories.* Electric Linear Actuators Series.* Geared Motor and Gear Reducers Series.

Clients Countries1. American Countries: United States, Mexico, Canada, Chile.2. European Countries: Germany, France, United Kingdom, Italy, Spain, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Georgia, Slovenia.3. Asian Countries: Malaysia, Indonesia, Singapore, Philippines, Vietnam, Thailand, India, Israel.4. Oceanian Countries: Australia, New Zealand.5. African Countries: South Africa, Egypt.

Contact InformationJACTON INDUSTRY Co., Ltd (VAT No.: 9144190007026567X3) is 1 of the leading companies in the field of Screw Jacks(Mechanical Actuators), Bevel Gearboxes, Lifting Systems, Linear Actuators, Gearmotors and Speed Reducers. We are an audited professional manufacturer and supplier by SGS (Serial NO.: QIP-ASI192186) and BV (Serial NO.: MIC-ASR257162) organizations. We have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, and consistently provide the customers with the best engineered solution for precision linear actuation, power transmission and mechanical jacking systems. CZPT Industry guarantees quality, reliability, performance and value for today′s demanding industrial applications.

FAQ
1. What type of payment methods do you accept?
We accept Wire transfer, Credit Card, Paypal, Alibaba Trade Assurance order, Western Union and L/C etc.
2. Can I get 1 sample to test?
Yes, sample can be at a normal price and welcomed. The transport fees are at your account.
3. How about the quality of your product?
Jacton industry is only focus on the field of Screw Jacks(Mechanical Actuators), Bevel Gearboxes, Lifting Systems, Linear Actuators, Gearmotors and Speed Reducers. 4. OEM/ODM Accepted?
Yes, Please send you new product drawings or sample to us if you have, and we can custom-made as your required. We will also provide professional advices of the products to make the design to be maximize the performance.
5. If you can not find the product on our website,how do you do?
Please send us inquiry with product pictures and drawings by email or other ways you prefer, we’ll check if we could produce.
6. Can I trust you?
Absolutely yes. Samples could be provided to test firstly, and we can use Alibaba trade assurance service to do business to guarantee both the seller and buyer’s benefit, and we are golden supplier for years.
7. What’s our products warranty?One year quality guarantee for the products from your purchase date, 8U Groove 869 Reinforced Fork Tail Single Pulley Slide Window Sliding Door Roller except the human damage.

What Are Worm Gears and Worm Shafts?

If you’re looking for a fishing reel with a worm gear system, you’ve probably come across the term ‘worm gear’. But what are worm gears and worm shafts? And what are the advantages and disadvantages of worm gears? Let’s take a closer look! Read on to learn more about worm gears and shafts! Then you’ll be well on your way to purchasing a reel with a worm gear system.
worm shaft

worm gear reducers

Worm shaft reducers have a number of advantages over conventional gear reduction mechanisms. First, they’re highly efficient. While single stage worm reducers have a maximum reduction ratio of about five to sixty, hypoid gears can typically go up to a maximum of one hundred and twenty times. A worm shaft reducer is only as efficient as the gearing it utilizes. This article will discuss some of the advantages of using a hypoid gear set, and how it can benefit your business.
To assemble a worm shaft reducer, first remove the flange from the motor. Then, remove the output bearing carrier and output gear assembly. Lastly, install the intermediate worm assembly through the bore opposite to the attachment housing. Once installed, you should carefully remove the bearing carrier and the gear assembly from the motor. Don’t forget to remove the oil seal from the housing and motor flange. During this process, you must use a small hammer to tap around the face of the plug near the outside diameter of the housing.
Worm gears are often used in reversing prevention systems. The backlash of a worm gear can increase with wear. However, a duplex worm gear was designed to address this problem. This type of gear requires a smaller backlash but is still highly precise. It uses different leads for the opposing tooth face, which continuously alters its tooth thickness. Worm gears can also be adjusted axially.

worm gears

There are a couple of different types of lubricants that are used in worm gears. The first, polyalkylene glycols, are used in cases where high temperature is not a concern. This type of lubricant does not contain any waxes, which makes it an excellent choice in low-temperature applications. However, these lubricants are not compatible with mineral oils or some types of paints and seals. Worm gears typically feature a steel worm and a brass wheel. The brass wheel is much easier to remodel than steel and is generally modeled as a sacrificial component.
The worm gear is most effective when it is used in small and compact applications. Worm gears can greatly increase torque or reduce speed, and they are often used where space is an issue. Worm gears are among the smoothest and quietest gear systems on the market, and their meshing effectiveness is excellent. However, the worm gear requires high-quality manufacturing to perform at its highest levels. If you’re considering a worm gear for a project, it’s important to make sure that you find a manufacturer with a long and high quality reputation.
The pitch diameters of both worm and pinion gears must match. The two worm cylinders in a worm wheel have the same pitch diameter. The worm wheel shaft has two pitch cylinders and two threads. They are similar in pitch diameter, but have different advancing angles. A self-locking worm gear, also known as a wormwheel, is usually self-locking. Moreover, self-locking worm gears are easy to install.

worm shafts

The deflection of worm shafts varies with toothing parameters. In addition to toothing length, worm gear size and pressure angle, worm gear size and number of helical threads are all influencing factors. These variations are modeled in the standard ISO/TS 14521 reference gear. This table shows the variations in each parameter. The ID indicates the worm shaft’s center distance. In addition, a new calculation method is presented for determining the equivalent bending diameter of the worm.
The deflection of worm shafts is investigated using a four-stage process. First, the finite element method is used to compute the deflection of a worm shaft. Then, the worm shaft is experimentally tested, comparing the results with the corresponding simulations. The final stage of the simulation is to consider the toothing geometry of 15 different worm gear toothings. The results of this step confirm the modeled results.
The lead on the right and left tooth surfaces of worms is the same. However, the lead can be varied along the worm shaft. This is called dual lead worm gear, and is used to eliminate play in the main worm gear of hobbing machines. The pitch diameters of worm modules are equal. The same principle applies to their pitch diameters. Generally, the lead angle increases as the number of threads decreases. Hence, the larger the lead angle, the less self-locking it becomes.
worm shaft

worm gears in fishing reels

Fishing reels usually include worm shafts as a part of the construction. Worm shafts in fishing reels allow for uniform worm winding. The worm shaft is attached to a bearing on the rear wall of the reel unit through a hole. The worm shaft’s front end is supported by a concave hole in the front of the reel unit. A conventional fishing reel may also have a worm shaft attached to the sidewall.
The gear support portion 29 supports the rear end of the pinion gear 12. It is a thick rib that protrudes from the lid portion 2 b. It is mounted on a bushing 14 b, which has a through hole through which the worm shaft 20 passes. This worm gear supports the worm. There are two types of worm gears available for fishing reels. The two types of worm gears may have different number of teeth or they may be the same.
Typical worm shafts are made of stainless steel. Stainless steel worm shafts are especially corrosion-resistant and durable. Worm shafts are used on spinning reels, spin-casting reels, and in many electrical tools. A worm shaft can be reversible, but it is not entirely reliable. There are numerous benefits of worm shafts in fishing reels. These fishing reels also feature a line winder or level winder.

worm gears in electrical tools

Worms have different tooth shapes that can help increase the load carrying capacity of a worm gear. Different tooth shapes can be used with circular or secondary curve cross sections. The pitch point of the cross section is the boundary for this type of mesh. The mesh can be either positive or negative depending on the desired torque. Worm teeth can also be inspected by measuring them over pins. In many cases, the lead thickness of a worm can be adjusted using a gear tooth caliper.
The worm shaft is fixed to the lower case section 8 via a rubber bush 13. The worm wheel 3 is attached to the joint shaft 12. The worm 2 is coaxially attached to the shaft end section 12a. This joint shaft connects to a swing arm and rotates the worm wheel 3.
The backlash of a worm gear may be increased if the worm is not mounted properly. To fix the problem, manufacturers have developed duplex worm gears, which are suitable for small backlash applications. Duplex worm gears utilize different leads on each tooth face for continuous change in tooth thickness. In this way, the center distance of the worm gear can be adjusted without changing the worm’s design.

worm gears in engines

Using worm shafts in engines has a few benefits. First of all, worm gears are quiet. The gear and worm face move in opposite directions so the energy transferred is linear. Worm gears are popular in applications where torque is important, such as elevators and lifts. Worm gears also have the advantage of being made from soft materials, making them easy to lubricate and to use in applications where noise is a concern.
Lubricants are necessary for worm gears. The viscosity of lubricants determines whether the worm is able to touch the gear or wheel. Common lubricants are ISO 680 and 460, but higher viscosity oil is not uncommon. It is essential to use the right lubricants for worm gears, since they cannot be lubricated indefinitely.
Worm gears are not recommended for engines due to their limited performance. The worm gear’s spiral motion causes a significant reduction in space, but this requires a high amount of lubrication. Worm gears are susceptible to breaking down because of the stress placed on them. Moreover, their limited speed can cause significant damage to the gearbox, so careful maintenance is essential. To make sure worm gears remain in top condition, you should inspect and clean them regularly.
worm shaft

Methods for manufacturing worm shafts

A novel approach to manufacturing worm shafts and gearboxes is provided by the methods of the present invention. Aspects of the technique involve manufacturing the worm shaft from a common worm shaft blank having a defined outer diameter and axial pitch. The worm shaft blank is then adapted to the desired gear ratio, resulting in a gearbox family with multiple gear ratios. The preferred method for manufacturing worm shafts and gearboxes is outlined below.
A worm shaft assembly process may involve establishing an axial pitch for a given frame size and reduction ratio. A single worm shaft blank typically has an outer diameter of 100 millimeters, which is the measurement of the worm gear set’s center distance. Upon completion of the assembly process, the worm shaft has the desired axial pitch. Methods for manufacturing worm shafts include the following:
For the design of the worm gear, a high degree of conformity is required. Worm gears are classified as a screw pair in the lower pairs. Worm gears have high relative sliding, which is advantageous when comparing them to other types of gears. Worm gears require good surface finish and rigid positioning. Worm gear lubrication usually comprises surface active additives such as silica or phosphor-bronze. Worm gear lubricants are often mixed. The lubricant film that forms on the gear teeth has little impact on wear and is generally a good lubricant.

China Good quality Quick lifting manual bevel gear screw jack from hand operating with wheel crank for 30mm CZPT screw  with high qualityChina Good quality Quick lifting manual bevel gear screw jack from hand operating with wheel crank for 30mm CZPT screw  with high quality

As one of leading power take off shaft manufacturers, suppliers and exporters of mechanical products, We offer power take off shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of power take off shaft

Recent Posts